Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
DMC
DMC-SX End Mill Shouldering Slotting Facing
D +0 4°
-0.2mm
dh7 Fig.1
S L
4°
D +-00.2mm
dh7 Fig.2
S L
Toolholder Dimensions Dimensions (mm) Rake Angle Clamp Set Spare Parts Wrench
(°) Clamp Screw
Part Number Drawing
E
90 LEAD D d L S A.R. R.R.
Stock
No. of
Inserts
DMC 316SXT 16 16 90 Fig.1 - SB-4060TR
DMC 320SX 1 30 -3° CPS-2TR SB-4065TR
325SX
332SX 2 20 20 110 - SB-4065TR
340SX
320SX-200 1 25 25 120 14.0 +3° -2° Fig.2 FT-15
325SX-220 FT-15
332SX-250 2 32 32 130 40 0°
40 32 150
20 20 200 50 -3°
25 25 220 60 14.0 +3° -2° Fig.1
32 32 250 80 0°
Applicable Inserts Applicable Inserts B20 When installing inserts with corner-R(r) over 2.0mm, grind off the corner part of the tool's
insert pocket to avoid contact with the workpiece.
Part Number Additional modifications for the body will be necessary. Ref. to the table below for the
recommended modifications.
(Additional grind off is not necessary when corner-R(r) is 0.8mm or less.)
DMC 316SXT NDCW 3205TR Insert Corner-R(r) Additional Processing Dimension to Body Corner (mm)
DMC 320SX NDCW 321TR
325SX NDCW 322TR 2.0 R1.0
332SX NDCW 325TR 3.0 R1.6
340SX NDCW 3275TR 4.0 R2.0
320SX-200 NDCW 3210TR
325SX-220 (NDCW 322TRX) * Round- chamfer additional processing is recommended.
332SX-250 (NDCW 322FRX) When applying chamfer, do not cut away too much.
NDCT 322TR NDMM 321ER-SP
NDCT 322FR NDMM 322ER-SP
(NDCT 322TRX)
Body Corner Additionally Insert with
Pre-processing Processed Large Corner-R(r)
Inserts in parenthese ( ) are applicable, however toolholder will be further out from insert bottom. Post-processing
(See lower section of E67
DMC-SX Recommended Cutting Conditions
Workpiece Feed Rate Recommended Insert Grade (Vc sfm) Max. D.O.C. (in)
Material fz (ipt)
Cermet Carbide
TN100M KW10 Cutting Dia. (D) Slotting (D.O.C.) Shouldering (D.O.C. x ae)
~12mm
Carbon Steel ~0.008 - 14mm~ 0.079 0.236 x 0.079
390~660 ~12mm 0.118 0.354 x 0.118
14mm~ 0.079 0.236 x 0.079
Alloy Steel ~0.008 - ~12mm 0.118 0.354 x 0.118
330~590 14mm~ 0.079 0.236 x 0.079
~12mm 0.118 0.354 x 0.118
Mold Steel ~0.006 - 14mm~ 0.059 0.157 x 0.079
330~590 ~12mm 0.079 0.236 x 0.079
14mm~ 0.079 0.236 x 0.079
Stainless Steel ~0.006 - ~12mm 0.118 0.354 x 0.118
390~660 14mm~ 0.079 0.236 x 0.079
0.118 0.354 x 0.118
Cast Iron ~0.008 -
260~490
Non-ferrous Metals ~0.008 -
330~980
Use DMC8 with Max. D.O.C. = 0.236" for shouldering. :1st Recommendation : 2nd Recommendation
E66 kyocera@kyocera-tools.ru U.S. Stock Standard :
www.kyocera-tools.ru World Express (Shipping: 7-10 Business Days) :