Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
INSERT GRADES
CERAMIC GRADES
CERAMIC LINEUP / INSERTS 45 / 70 LEAD A
B
Ceramic inserts are capable of running at high speeds, thus reducing expensive machining time. C
Hard turning of 38HRC to 64HRC hardened steel, or rough to finish turning of cast iron are D
recommended applications for ceramic inserts. E
F
KYOCERA’s ceramic grades are designed to resist oxidation and maintain hardness at elevated G
temperatures. H
J
FEATURES K
O
• E xcellent wear resistance for high cutting speeds
• C eramic maintains good surface finishes due to the low affinity to workpiece materials
• S ilicon nitride ceramic has improved thermal shock resistance allowing cast iron cutting using coolants
FEATURES OF CERAMIC 75 LEAD
Material Description Color Main Coating Hardness of Fracture Transverse
Component Layer Substrate Toughness Strength Advantages
(GPa) (MPa·m) (MPa)
(Coating
Composition) 90 LEAD
KA30 White Al2O3 - 17.5 4.0 750 · Aluminum Oxide ceramic (Al2O3)
· Application: Finishing of cast iron at high cutting speeds without coolant
K KS6050 Gray Si3N4 - 15.6 · Silicon nitride ceramic (Si3N4)
15.6 8.0 1,200 · Application: Roughing and interrupted machining of cast iron. Focusing on stability.
Cast Iron HIGH FEED
(with or without coolant)
CS7050 Grayish Si3N4 Thin Coating
White (Special Al2O3 Coat) · Silicon nitride ceramic (Si3N4) + CVD Coated Carbide (Special Al2O3 COAT)
8.0 1,200 · Application: Finishing and continuousmachining, and high speed and high efficient machining.
(with or without coolant)
K A65 Black Al2O3+TiC - 20.1 4.1 980 · Aluminum Oxide and Titanium Carbide ceramic (Al2O3+TiC) MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
· Application: Semi-roughing to finishing of steel, cast iron, and hard materials
HCast Iron A66N Gold Al2O3+TiC Thin Coating 20.1 4.1 980 · TiN PVD coated Aluminum Oxide and Titanium Carbide ceramic (TiN coated Al2O3+TiC)
(TiN Coat) · Application: Semi-roughing to finishing of hard materials
Hardened PT600M Blackish Al2O3+TiC Thin Coating 20.1 4.1 · Heat-resistant MEGACOAT on Aluminum Oxide and Titanium Carbide ceramic
Materials Red (MEGACOAT) 980 (MEGACOAT Al2O3+TiC)
· Application: Semi-roughing to finishing of cast iron, hard materials and hardened roll materials
S KS6030 Gray SiAlON - 15.2 6.0 600 · SiAlON Ceramic with superior wear resistance and high resistance against boundary wear
· Application: Finishing to medium machining of heat-resistant alloys
Heat-Resistant KS6040 Brown SiAlON - 16.7 7 .0 900 · High stability SiAlON ceramic with wear resistance and fracture resistance
Alloys · Application: Roughing of heat-resistant alloys
Application Maps Hardened Material Heat-Resistant Alloys
PT600M CF1
Cast Iron
A66N KS6030
Low Cutting Speed High KA30 Low Cutting Speed High Low Cutting Speed High KS6040
A65
CS7050
PT600M
A65 KS6050
Continuous Light Interruption Interruption Continuous Light Interruption Interruption Continuous Light Interruption Interruption P
R
Low Fracture Resistance (Toughness) High Low Fracture Resistance (Toughness) High Low Fracture Resistance (Toughness) High T
High Temperature Hardness PVD Coating Properties A13
(Hv) 40 TECHNICAL
2800 Al203-TiC Ceramic Hardness (GPa) TiC MEGACOAT
2400 30 TiCN
Hardness 2000 Al203 Ceramic
1600 Carbide 20 TiN TiAIN
1200 High Speed Steel
Cermet INDEX
800
10
400
0 600 1000 1400 0 200 400 600 800 1,000 1,200 1,400
200
Oxidation temperature (°C)
Temperature (°C)
kyocera@kyocera-tools.ru
www.kyocera-tools.ru