Kyocera - Инструмент для обработки мелких деталей 2016 ENG

                                                                                                      для заказа - kyocera@kyocera-tools.ru

                              EZT RECOMMENDED CUTTING CONDITIONS

                               R ecommended Cutting Conditions                                Note:
                                                                                                1) The standard cutting speed is Vc (sfm) = 100-175. The table feed may
   GRADES                                            Recommended Insert Grade (Vc sfm)

A Workpiece                                                   MEGACOAT                             not follow the expected conditions when machining small diameter
                                                                                                   workpieces at high speeds.
                             Material

                                                              PR1225                            2) Coolant is recommended.

                 Carbon Steel/Alloy SteelINSERTS                       

B                                                                   330-1070

                 Stainless Steel                                       

                                                                    330-820

                              Non-ferrous Metals                       -

C  : 1st Recommendation  : 2nd RecommendationCBN & PCD

                               D .O.C. & Number of Passes (Metric)

E PitchTURNING                 Total     No. of     1     2     3        4      5        6     7     8     9    10    11     12               13    14    15    16        17    18    19    20
                     (mm)     D.O.C.     Passes   Pass  Pass  Pass     Pass   Pass     Pass  Pass  Pass  Pass  Pass  Pass   Pass             Pass  Pass  Pass  Pass      Pass  Pass  Pass  Pass
                               (mm)

                              0.50 0.30           9 0.05 0.05 0.04 0.04 0.03 0.03 0.02 0.02 0.02

                              0.70 0.42  10 0.06 0.05 0.05 0.05 0.05 0.04 0.04 0.03 0.03 0.02

   BORING                     0.75 0.45  10 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.04 0.03 0.03

F 0.80 0.48                              11 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.04 0.03 0.03 0.03

                              1.00 0.61  12 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.03 0.03

                              1.25 0.77  14 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.05 0.05 0.04 0.04 0.04 0.03

   GROOVING                   1.50 0.93  17 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.03

G 1.75 1.10                              20 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.05 0.04 0.04 0.04 0.03 0.03

                               D .O.C. & Number of Passes (Whitworth)

H TPICUT-OFF                  Total No. of        1     2           3         4        5        6     7     8        9 10 11 12 13 14 15 16 17
                              D.O.C. Passes P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s

                              24 0.0256 13        0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001

                              20 0.0319 15        0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001

J 18 0.0358 17SOLID END MILLS THREADING           0.003 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001 0.001

                               D .O.C. & Number of Passes (Unified)

L TPI                         Total No. of        1     2     3           4         5        6     7     8     9 10 11 12 13 14 15 16 17 18
                              D.O.C. Passes P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s P a s s

                              36 0.0173 8 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001 0.001

                              32 0.0197 10 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001 0.001

   MILLING                    28 0.0217 12 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001 0.001

M 24 0.0256 12 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001
                        20 0.0307 14 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001

                              18 0.0346 17 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001

   SPARE PARTS                16 0.0390 18 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001

P

R  TECHNICAL

T  INDEX

   J12                                                                                          kyocera@kyocera-tools.ru
                                                                                                   www.kyocera-tools.ru